Moulinex DFC3 Instructions And Recipes Manual page 4

ASSEMBLING AND DISMANTLING THE BOWL
1
B3a
B3b
B4a
FITTING DETACHABLE PARTS
Assembling/Dismantling the bowl
(B3) - (diagram 1)
The bowl can be used with the following
accessories (depending on model):
Blades (D), grating/slicing discs (E),
whisk (F), emulsifying disc (G), citrus
press (H), juice extractor (J).
• If not already fitted, position drive
(B3a) in the bowl.
• Lock the drive (B3a) with the nut
(B3b) as far as it will go by aligning
the tabs then twisting to lock them
(see diagram above).
• Dismantle the bowl assembly and
clean it after each use.
(Note: Whether you are using the Liquidiser jug (l3) or the bowl (B3) you will
need to ensure that the respective handle and lid have been fitted correctly.)
5
Fitting/Dismantling the bowl
handle (B4) and the liquidiser jug
handle (I4)
For ease of cleaning and storage, the
bowl handle (B4) and liquidiser jug
handle (I4) are detachable.
• To fit the handle, position it against
the lugs of the bowl/jug.
• Slide the handle upwards until
it clicks.
• To detach the handle, press the
release button (B4a) or (I4a) and slide
the handle downwards.
FUNCTIONS OF YOUR FOOD PROCESSOR
2
2
1
MIXING/BLENDING/CHOPPING/
KNEADING - (DIAGRAM 2)
Accessories used (depending
on model)
• Bowl assembly (B), spindle (C) and
blades (D):
• Metal blade (D1) for mixing or chopping.
• Plastic kneading blade (D2) for kneading
or blending, pastry and cake making
Fitting the Bowl
Press the release button (A4) to open
the Liquidiser drive cover (A1).
• Fit the bowl (B3) on the Bowl
accessory drive (A3).
• Fit the spindle (C) on to the
bowl drive (B3a).
• Slide the metal blade (D1) or the
plastic kneading blade (D2) onto the
spindle (C), pushing it down to the
bottom of the bowl.
• Put the ingredients in the bowl.
• Fit the lid (B2) on the bowl.
• Close the Liquidiser drive cover (A1).
You should hear an audible click.
Note: If the lid and handle are not
correctly fitted on to the bowl, the
appliance will not start.
To unlock the blades (D) from the
spindle (C):
• Place the bowl assembly on a stable
flat worktop.
• Carefully lift the blade (D) of the
spindle (C).
Usage and practical tips
Blending
• Turn the speed selector (A5) to
position "2" to start the appliance.
You can blend up to 1 litre of soup or
stewed fruit in 20 sec.
Chopping
• Turn the speed selector (A5) to
position "2" to start the appliance or,
for better control over the chopping,
use the "pulse" position.
• In 15 to 30 sec., you can chop up to
600g of food:
• hard produce: cheese, dried fruits,
certain vegetables (carrots, celery...).
• soft produce: certain vegetables
(onions, spinach...).
• raw or cooked meat (boned with
gristle removed and diced).
• raw or cooked fish...
6