Identifying Controls - Panasonic Viera TX-L19C20E Operating Instructions Manual

Identifying Controls

TV
CI slot
(p. 38)
Headphones
jack
(p. 55)
SD Card slot
(p. 44)
8
SD
CARD
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when "Eco Mode" in the Picture Menu
is set to "On" (p. 26)
Remote control signal receiver
Do not place any objects between the TV remote control signal receiver and
remote control.
Mains power On / Off switch
Switch On to turn on the TV or turn the TV to standby
mode by the remote control
Recording LED
Standby for Direct TV Recording: orange
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
Changes the input mode
Increases or decreases the channel
position by one. When a function is
already displayed, press to increase or
decrease the selected function.
When in Standby mode, switches TV On.
Function select
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble /
Balance / Auto Setup (p. 30 and p. 31)