Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
To connect PC
INPUT
TV
ASPECT
MENU
N
DIRECT TV REC
OPTION
TEXT STTL INDEX HOLD
To return to TV
TV
PC menu setting (changed as desired)
To make settings
Menu
Advanced
PC
Settings
PC
Setup
Other items
Note
For HDMI-compatible PC, possible to connect to HDMI terminal by using HDMI cable (p. 59).
42
p. 54
Select the external input
1
AV
AV
EXIT
Select "PC"
2
Input Selection
AV1
RETURN
AV2/S
COMPONENT
PC
HDMI
TV
"How to Use Menu Functions"
Item
R-Gain
Adjusts the white balance for red areas
G-Gain
Adjusts the white balance for green areas
B-Gain
Adjusts the white balance for blue areas
Gamma
Switches the gamma curve (2.0 / 2.2 / 2.5)
Reset to
Press the OK button to reset to the default Advanced PC Settings
Defaults
Switches to a wide view
Input
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
Resolution
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
Clock
Set to the minimum level if noise occurs
Adjusts horizontal position
H-pos
Adjusts vertical position
V-pos
Eliminates flicker and distortion
Clock Phase
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H & V / On Green)
Sync
H & V
On Green : by the green signal from your PC (if available)
Reset to
Press the OK button to reset to the default PC Setup settings
Defaults
p. 26 - 29
to
(p. 24)
Adjustments / Configurations (options)
: by the horizontal and vertical signals from your PC
access
select
Corresponding signals
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
Set to the minimum level if noise occurs
p. 60