Table of Contents
Advertisement
Chapter 3 — Operation by Web Browser
3.1 Connecting the Network Dome Camera by Web Browser
●Execute the Web Browser on the PC.
●Enter the
Network Dome Camera
execute it.
Ex) http://192.168.0.2/
(If the
Network Dome Camera
connect the
Network Dome
Dome Camera
●Refer to „2.7 Network Camera IP Assignment‟ section for detailed information.
●If a security window for the ActiveX Controller installation appears, press the Confirm and
install it.
●If it is not connected in the Internet, from the CD-ROM install the ActiveX Controller by
manual operation.
3.2 Real-Time Monitoring
The monitoring screen comes in four screen modes like D1, 640 X 480, 320 X 240, and 160 X
120. Users are allowed to select the most suitable one out of those modes. Please, adjust the
mode in accordance with your PC specifications and monitoring purposes.
In case of real-time monitoring with the Web Browser, one
connected to just one Web Browser. However, this case is not suitable for monitoring various
screens at the same time. If users are to monitor various images at the same time, please
contact your dealer.
address on the address window of the Web Brower and
has no IP address or its IP address is wrong, users will fail to
Camera. In this case, users will have to connect the
the Web Browser after entering the IP address with the IP Utility.)
Network Dome Camera
- 9 -
Network
will be
Advertisement
Table of Contents
