External Equipment - Panasonic Viera TX-26LE7FA Operating Instructions Manual

External Equipment

Q-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback.
Condition
•
Use the VCR / DVD recorder with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"
•
Connect the equipment to this unit's AV1 or AV2 terminal via a "fully-wired" SCART cable. (p. 20)
•
Q-Link terminal setup in Setup menu (Q-Link, AV1/AV2 out). (p. 14)
Download channel settings
•
Perform Auto setup. (p. 16)
When fi rst using this unit, see "Auto Setup". (p. 9)
•
Perform download to the equipment. (p. 16)
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
What you
see is
What you
record
Information
/ Message
Power
on link
and Easy
playback
Power off
link
• "DATA LOGIC" (a trademark of Metz Corporation) • "Megalogic" (a trademark of Grundig Corporation)
• "Easy Link" (a trademark of Philips Corporation) • "SMARTLINK" (a trademark of Sony Corporation)
Read the manuals of the equipment too.
18
Direct TV Recording:
Recording the current programme in VCR / DVD recorder immediately.
DIRECT TV REC
DIRECT TV REC
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is "0" or "AV mode" for some equipment.)
Insert a videocassette or DVD in the recording equipment and it is operated, TV
is turned on and input mode is switched automatically so that you can view the
content. (Only when TV is in Standby mode.)
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
Q-Link
•
When Direct TV Recording is performed, the
recording equipment is automatically turned on if it
is in Standby mode.
•
The recording equipment is recording from its own
tuner. You can turn the TV off during recording.
•
Do not turn the TV off during recording AV source.
Otherwise the recording will be stopped.