Panasonic Diga DMR-XW380 Operating Instructions Manual page 91

U61
(When a disc is not inserted) Displays when a
malfunction has occurred. This is displayed when
the unit is in the recovery process to return to
normal operation. Once the display clears you can
use the unit again.
If it remains displayed, consult the dealer where
the unit was purchased.
U72
U73
The HDMI connection acts unusually.
–The connected equipment is not HDMI
compatible.
–Please use HDMI cables that have the HDMI
logo (as shown on the cover).
–The HDMI cable is damaged.
U76
HDMI cannot be output because you are
connected to a model that does not support
copyright protection.
U77
Due to the current disc not having authorised copyright
information, video output is not performed.
U88
(When a disc is inserted) Displays when there was
something unusual detected with the disc while
recording, playback or copy. This is displayed
when the unit is in the recovery process to return
to normal operation. Once the display clears you
can use the unit again. (
If it remains displayed, consult the dealer where
the unit was purchased.
U99
The unit fails to operate properly. Press [Í/I] on
the main unit to switch the unit to standby mode.
Now press [Í/I] on the main unit again to turn the
unit on.
92)
H or F
("∑" stands for a number.)
There is something unusual. (The service number
displayed after H and F depends on the unit's
condition.)
Check the unit using the troubleshooting guide
( 92–97). If the service number does not
disappear, do the following.
1. Disconnect the plug from the household mains
socket, wait a few seconds, then reconnect it.
2. Press [Í/I] to turn the power on. (The unit may be
fixed.)
If the service number does not disappear despite
after doing the above, request service from the
dealer. Inform the dealer of the service number when
requesting service.
X HOLD
The HOLD function is activated.
Press and hold [OK] and [BACK/RETURN
the same time until "X HOLD" disappears. (
] at
88)
91
VQT2J58