Digital Audio Output; Pcm Down Conversion - Panasonic Diga DMR-XW380 Operating Instructions Manual

∫ Digital Audio Output

PCM Down Conversion

Select how to output audio with a sampling
frequency of 96 kHz.
≥It will be converted to 48 kHz regardless of the
setting in the following cases.
–The signals have a sampling frequency of over
96 kHz.
–The disc has copy protection.
≥If "Off" is selected, signals are output as 96 kHz
≥If "On" is selected, signals are converted to
48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of 96
kHz.)
Dolby Digital/Dolby Digital Plus
DTS
MPEG
Select the audio signal to output.
≥ Select "PCM" when the connected equipment
cannot decode the respective audio format.
≥ Not making the proper settings may result in noise.
≥ Sound with Audio Description or sound of HE-AAC
audio type is output as PCM signal regardless of
settings.
∫ Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
∫ Audio Type for XP Recording
Choose the audio type when recording or copying
with XP mode.
≥The picture quality of LPCM recordings may be
lower than that of normal XP mode recordings.
≥The audio becomes Dolby Digital even if you
selected LPCM when using a recording mode other
than XP.
∫ Audio Type for DV Input
You can select the kind of audio when recording from
the unit's DV input terminal (
≥If "Mix" is selected, both Stereo 1 and Stereo 2 are
recorded.
≥When recording bilingual broadcast, select the type
of audio in advance from "Bilingual Audio Selection"
( 80).
∫ Audio for HG / HX / HE / HL / HM
Recording
If the programme has multi channel audio, priority is
given to what you select.
≥This setting will give effect in the following cases.
–Convert to HG, HX, HE, HL or HM mode in "DR
File Conversion" ( 41)
62).
81
VQT2J58