Panasonic Lumix DMC-SZ5 Operating Instructions Manual page 28

Scene Detection
When the camera identifies the optimum scene, the icon of the scene concerned is displayed in
blue for 2 seconds, after which its colour changes to the usual red.
When taking pictures
> [i-Portrait]
¦
[i-Macro]
[i-Night Scenery]
¢ Only when [
When recording motion pictures
> [i-Portrait]
¦
[i-Low Light]
•
[ ¦ ] is set if none of the scenes are applicable, and the standard settings are set.
•
When [ ] or [ ] is selected, the camera automatically detects a person's face, and it will adjust
the focus and exposure. (Face Detection)
•
If a tripod is used, for instance, and the camera has judged that camera shake is minimal when the
Scene Mode has been identified as [
Take care not to move the camera while taking pictures.
•
Due to conditions such as the ones below, a different scene may be identified for the same subject.
–
Subject conditions: When the face is bright or dark, the size of the subject, the colour of the
subject, the distance to the subject, the contrast of the subject, when the subject is moving
–
Recording conditions: Sunset, sunrise, under low brightness conditions, when the camera is
shaken, when zoom is used
•
For the best results, it is recommended that you take pictures in the appropriate Recording Mode.
The Backlight Compensation
When there is a backlight, the subject appears darker and the camera will automatically
attempt to correct it by increasing the brightness of the picture.
In Intelligent Auto Mode, backlight compensation works automatically. The [
the screen when backlighting is detected. (Depending on the backlighting conditions,
backlighting may not be detected correctly.)
Basic
] is selected.
], the shutter speed will be set to a maximum of 8 seconds.
- 28 -
[i-Scenery]
[i-Night Portrait] ¢
[i-Sunset]
[i-Scenery]
[i-Macro]
] is displayed on