Securing The Tv - Panasonic Viera TX-L32D28BP Operating Instructions Manual

To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and
cautions below:
Warning
●
Do not disassemble or modify the stand.
Caution
●
Do not use with any other TVs or displays.
●
Do not use the stand if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic
dealer immediately.
●
During setup, make sure that all screws are securely tightened.
●
Ensure that the TV does not suffer any impact during installation of the stand.
●
Ensure that children do not climb onto the stand.
●
Install or remove the TV from the stand with at least two people.
Do not tilt the TV by
placing something
between the stand and the
floor. TV may fall over and
become damaged, and
personal injury may result.
■
Assembly screw (4)
(silver)
●
XYN4+F12FJ
M4 × 12
■

Securing the TV

Use the assembly screws to fasten the
stand securely to the TV.
●
Make sure that the screws are
securely tightened.
●
Carry out the work on a horizontal and
level surface.
●
Depending on the length of the screw
driver you use, it is difficult to tighten
the two screws at the bottom. Make
sure all screws are securely tightened.
To prevent from falling, please
secure the TV to the wall by using
strong string or wire.
●
Put the strong string or wire through
the hole on the bottom rear of the TV
as shown in the illustration.
Attaching the stand
Stand is very heavy.
Please handle with
both hands as shown
in image.
■
Stand
●
TBLX0186 (TX-L32D28BP, TX-L32D28BS, TX-L32D28BW)
●
TBLX0187 (TX-L37D28BS)
Foam mat or thick soft cloth
7