Media Player - Panasonic Viera TX-L32D28BP Operating Instructions Manual

Message
PIN incorrect!
Please check settings and connections
on HDMI devices.
Please enter a frequency between
10700 and 12750 MHz.
Please wait.
Recording this channel now
Reset to Factory Shipping Condition Completed.
Please switch off TV.
Sending Preset Data
Software successfully updated.
Press EXIT to continue.
Software update failed. Please try again later.
Press EXIT to continue.
The device is not directly connected to the TV.
The device may not work correctly.
This timer will not follow the TV Guide
information.
Press OK to continue, RETURN to restore
original timer.
Timer already expired !
Timer Event Due to Start
∗∗∗ ∗∗∗
: has been
programmed for External
∗∗
(USB HDD) recording at
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN to edit.
Tuner Locked
Press EXIT to unlock and stop recording
Unable to download, please check equipment
■

Media Player

Cannot read file
No Device Inserted
No valid file to play
Please confirm the Device is OK
This operation is not possible
■
Network
An internal error occurred.
Cannot read file
Communication with the server failed.
Connection to the server failed.
Server not found
The software update is not completed.
Ethernet cable not connected
●
The PIN number you entered is wrong.
●
Communication error in VIERA Link function (p. 87).
●
The frequency you entered is out of range. Consult the received satelite
broadcasting company. (p. 48).
●
A function is in progress.
●
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
●
"Auto Setup" will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
●
Q-Link or VIERA Link channel download is in progress.
●
The software updating is finished.
●
Perform "System Update Search Now" in System Update (p. 58).
If this is still unsuccessful, there may not be any new software available.
●
Please do not connect the device via a USB HUB.
●
If you edit the start time or end time of Guide link programming by more
than 10 minutes, it will no longer be performed as Guide link programming.
The programming will be performed according to the time setting.
●
The starting time in Timer Programming has already passed. Set the
timer correctly (p. 53).
●
This message will appear 2 mins. before timer programming event for
external (USB HDD) recording due to start.
∗∗
:
●
Set the start and end times in Timer Programming correctly (p. 53).
●
Timer programming events are overlapped. Press the OK button to
keep the overlapped setting. "Ext Rec." and "USB HDD Rec." are given
priority over "Reminder". When two or more "Ext Rec." / "USB HDD
Rec." overlap, the first timer programming event starts and finishes as
programmed. The next timer programming event can then start.
●
If you want to unlock the tuner, cancel Direct TV Recording (p. 86 and p. 88),
the recording of Timer Programming (p. 53) or One Touch Recording.
●
The tape or disc is active. Stop the equipment and try again.
●
The file is damaged or unreadable.
●
The TV does not support the format. (For the applicable formats and data
●
Confirm the SD Card or USB device is inserted correctly.
●
The card has no data.
●
The inserted SD Card or USB device has a problem.
●
The selected operation is not available.
●
Check the settings. (p. 76 - 79)
●
The file is broken or unreadable.
Check applicable data format. (p. 74)
●
This might be a problem of the media server.
Read the manual of the server software.
●
Check the connections and settings. (p. 75 - 79)
●
There are no available media server on your home network.
Check the connections and settings. (p. 75 - 79)
●
Network download failed.
Check the connections and settings. (p. 75 - 79)
●
Check the connection of the LAN cable. If you use a hub, also check the
light on the hub is lit.
●
The LAN cable might be defective.
Meaning / Action
p. 66)
103