Panasonic TH-37PV70FA Operating Instructions Manual page 23

■
Menu list
Menu Item
AV Colour System
Q-Link
AV1 / AV2 out
Download
Child Lock
Auto Setup
Programme Edit
Manual Tuning
Off Timer
OSD Language
Teletext
Language
Teletext
Shipping Condition
Power Save
Side Panel
Input Labels
Banner Display
Timeout
VIERA Link
Refresh Rate
Software License
System Information
•
A different menu will be displayed while PC is used.
•
Only available items can be selected.
Adjustments / Confi gurations (alternatives)
Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / M.NTSC / NTSC)
Selects which AV terminal is to be used for data communication between this TV and a
compatible recording equipment (AV1 / AV2) (p. 30)
Chooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV2 / Monitor)
•
Monitor: Image displayed on screen
•
Component, PC and HDMI signals cannot be outputted
Downloads channel information to a Q-Link compatible equipment connected to the TV
Locks a programme channel to prevent access to it (p. 26)
Automatically sets the channels received in the area (p. 24)
Edits channels (p. 25)
Sets the channels manually (p. 25)
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Changes language for on-screen displays
Selects teletext language (West / East1 / East2)
•
West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
•
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
•
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Teletext display mode (TOP (FLOF) / List) (p. 18)
Resets all settings, for example, when moving house (p. 27)
Reduces brightness of picture to economise on power consumption (Off / On)
Increases the brightness of the side panel (Off / Low / Mid / High)
•
The recommended setting is "High" to prevent panel "image retention"
Labels or skips each input terminals (p. 28)
Sets how long the information banner (p. 15) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
Sets to use VIERA Link functions (Off / On) (p. 32)
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
•
Set to "100Hz" normally
Displays the software licence information
Displays the system information of this TV
(p. 29)
23