Other Play Methods; Anti-Skip System; Changing The Sound Quality; Program Play - Panasonic SL-SX240 Operating Instructions Manual

Other Play Methods

The letters such as A in the illustrations refer to the descriptions in the "Location of Controls" section. (See page 2.)
Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1
Select the desired track.
G
2
F

Program play

Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1
Select the desired track.
G
2
Register in sequence.
(The indication "M" and the programmed se-
quence appear on the display.)
B
VOL
3
Repeat steps 1 and 2 to program all
the desired tracks.
4
F
∫ To program the same track in the se-
quence more than once
After step 2, press [MEMORY/RECALL] the desired
∫
number of times.
∫ If "'" is displayed
No more tracks can be programmed.
∫
∫ To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
∫
(The number of the programmed tracks appear on
the display in sequence.)
∫ To delete the entire programmed se-
quence
Press [∫,OPR OFF].
∫
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
4
Repeat play/Random play
Press [MODE] while disc is playing or
when unit is in stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)( ----------------]
One track is repeated.
v
All-track repeat (`)
All the tracks on the disc are repeated. |
v
Random (RANDOM)
The tracks play once each in random
order and then play stops.
v
Random repeat (RANDOM, `) |
The tracks play repeatedly in random
order.
v
Cancel (no indicator is shown)
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 ` M)(------------]
One track is repeated.
v
Memory repeat ( ` M)
The programmed tracks are repeated. |
v
M
Cancel (
Note!
VOL
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The mode is canceled when you disconnect the power
source.

Anti-Skip System

This system deals with skipping in a variety
of ways:
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥The anti-skip memory (
10 seconds) fills in interruptions caused by bumps and
vibrations.
The anti-skip system works automatically while the
unit is on and cannot be canceled.
E
|
|
|
|
|
|
|
|
|
|
|
--------------}
|
|
|
|
-------------------------------------------}
)
40 seconds,
SL-SX280

Changing the sound quality

Press during play or stop mode.
Main unit
D
SL-SX280
Remote control
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>Cancel (no indicator is shown)
^==========b
S-XBS:
Select this setting to boost the low frequency range re-
sponse.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your earphones while riding on the train,
or to reduce fatigue when listening for a long period of
time.
Note!
The setting returns to S-XBS when you disconnect the
power source.
When bumps continue repeatedly
The message "SORRY" appears on the display and
sound is interrupted.
A
SL-SX240
Note!
The anti-skip memory compresses digital signals.
VOL
VOL
EQ
(Beep)
VOL
S-XBS TRAIN TRAIN
C
M
ALL 1
RANDOM
SORRY
RQT5792