Using
This epilation head is for legs/arms, so do not use it to your underarms
•
and bikini-line.
Trim your hair before epilating for the fi rst time or if you have not epilated
•
for a long time.
The recommended use temperature is 5-35 °C (41-95 °F).
•
If you use the appliance in temperature outside of the recommended
range, it may stop functioning or might reduce the operating time.
1. Wet your skin.
2. Wet the discs and place a small quantity of liquid body
soap on the discs.
3. Press the 0/1 switch to turn on the power and then
epilate.
Foam makes the epilator slide better, so you can move it fast. Always
•
wash the discs well after use to remove any residual soap.
Dry epilation
You can also epilate without wetting your skin or the discs.
Using
Apply the epilator at a right angle to your skin
and press gently while moving it slowly
against the hair growth, or your skin may be
damaged.
When using the appliance, pull your skin taut
•
where the area is prone to sagging (on the inside of the knees and elbows).
Rub your skin to lift short hair.
•
Do not remove the frame of the epilation head.
•
Please shave your hair with shaver head to no longer than 5 mm.
•
Reddening might appear for your fi rst use. Cool towel will help if you feel
•
pain or there is a rash.
We recommend regular use of massage sponges or exfoliation to prevent
•
ingrown hair.
Move the epilation head freely in any direction.
•
Wet/foam epilation
For best epilation results
7