Panasonic NV-HS860EE Operating Instructions Manual page 4

VCR Operation
When you want to operate the VCR, set the VCR/TV switch
to "VCR".
Numeric buttons
°
To select the programme positions (1–99) of the VCR.
Example:
9:
9
19:
To select the satellite programme positions.
Example:
SAT
SAT 9:
0
SAT
0
SAT19:
SAT
0
SAT129:
≥ 3-digit programme positions can be selected with this
remote control only in case of a satellite receiver that is
marked with (° 1 ) on the enclosed list of compatible
satellite receivers.
To enter a ShowView number.
To enter numbers for various settings.
RESET button
°
To reset the tape counter (elapsed time) to "0:00.00".
≥ The tape counter is automatically reset to "0:00.00"
when a video cassette is inserted.
VCR 1/2 switch
°
Set to the "VCR 2" position when using two Panasonic
VCRs. (See page 52.)
SUBTITLE button
°
This button does not operate on this VCR.
Infra-red transmitter
°
Child Lock Function buttons
°
(Convenient function to prevent unauthorized use)
This function deactivates all buttons on the VCR and the
remote control. Use this function, when you do not want
other people to operate the VCR.
To Activate the Child Lock Function:
1 Hold down the OK and the OFF (i) buttons
simultaneously until the "! " hold" indication appears
in the VCR display.
≥ If you press a button while the Child Lock function is
on, the "! " hold" indication appears in the VCR
display to inform you that no operation is possible.
To Cancel the Child Lock Function:
1 Hold down the OK and the OFF (i) buttons
simultaneously until the "! " hold" indication
disappears.
≥ If you disconnect the power cable, the Child Lock
function is automatically cancelled after the power
backup time of approximately 60 minutes has
elapsed.
≥ If you cannot cancel the Child Lock function, press
the EXIT button
4
1 9
SAT
0 9
1 9
1
2 9
and perform the operation step 1.
Cassette compartment
°
Infra-red Remote Control Receiver window
°
VCR display
°