Makita 9910 Instruction Manual
Hide thumbs
Also See for 9910:
- Instruction manual (44 pages) ,
- Technical information (5 pages) ,
- Parts breakdown (3 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita 9910
Summary of Contents for Makita 9910
-
Page 1: Belt Sander
Belt Sander MODEL 9910 MODEL 9911 003361 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. -
Page 2: Specifications
8JD, ENGLAND faces. Responsible manufacturer: Power supply Makita Corporation Anjo Aichi Japan The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They... -
Page 3: General Safety Rules
GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. -
Page 4: Specific Safety Rules
19. Store idle power tools out of the reach of chil- Always use safety glasses or goggles. Ordinary dren and do not allow persons unfamiliar with eye or sun glasses are NOT safety glasses. the power tool or these instructions to operate Hold the tool firmly with both hands. -
Page 5: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 003366 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”... - Page 6 NOTE: 1. Dust spout • If you connect a Makita vacuum cleaner to this tool, more efficient and 2. Dust bag cleaner operations can be performed. Connecting to Makita vacuum cleaner 004050 Cleaner sanding operations can be performed by connecting the belt sander to Makita vacuum cleaner.
-
Page 7: Operation
OPERATION Sanding operation 004232 CAUTION: • The tool should not be in contact with the workpiece surface when you turn the tool on or off. Otherwise a poor sanding finish or damage of the belt may result. Hold the tool firmly with both hands. Turn the tool on and wait until it attains full speed. - Page 8 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 9 Memo...
- Page 10 Memo...
- Page 11 Memo...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884138D223...