On Screen Messages - Panasonic Viera TX-26LMD70A Operating Instructions Manual

On screen messages

Message
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer
Press Exit to return
Bad Signal
DOWNLOAD IN PROGRESS PLEASE WAIT
Feature not available
Invalid DVB Channel
Invalid system time. Please exit !
Max. number of Timers already set !
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Profile and Childlock settings
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
No DVB Service found
No module inserted
No recording - Check Tape or Disc
No recording - UNKNOWN REASON
No Service
No Signal
Meaning / Action
•
"Shipping Condition" will erase all tuning data (p. 32).
•
"Auto Setup" will be erased all present DVB and Analogue tuning
datas (p. 30).
•
Make sure the operation is with your desire.
•
Make sure the deleting programme event is with your desire.
•
The signal is weak. Check the aerial.
•
Q-Link channel download is in progress.
•
Check the Q-Link connection and setting (p. 38).
•
The impossible source (Component / HDMI / PC) to be record.
•
Invalid DVB channel is selected.
•
Cannot get the time information. Check the connection of the RF
cable.
•
Maximum timer programming event is 8.
•
There is a new DVB station.
•
There is a new software available.
•
No DVB signal can be found in Auto Setup.
•
Check the CI module inserted completely (p. 27).
•
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
•
The recording cannot be done by any reason. Check the equipment.
•
Disc or tape may be full.
•
The station stops the services.
•
Check the connection of the RF cable.
49