Setting The Vcr's Clock - Panasonic NV-HS825EE Operating Instructions Manual

Setting the VCR's Clock

When [Россия] (Russia) is selected in the Country setting
menu, the [AUTO] field does not appear on Clock setting
menu.
To Manually Adjust the Clock
Press the [MENU] button to display the Main menu on
MENU
the TV screen.
Press the [Cursor] buttons 34
to select [Clock setting].
Press the [OK] button to display
OK
the Clock setting menu on the
TV screen.
Confirm that [Clock setting] is set to [MAN.], and then
OK
press the [OK] button.
Use the [Cursor] buttons 3421 to set the date and
time.
– Instead of the [Cursor] buttons 3421, you can also
use the [Numeric] buttons to set the date and time.
Press the [OK] button to conclude the setting.
OK
Press the [EXIT] button to exit the On Screen Display.
EXIT
To Activate the Automatic Time Correction
Function
If a TV station transmits a signal for time setting, performing
the operation steps below activates the Automatic time
correction function and the time is corrected automatically.
Press the [MENU] button to display the Main menu on
MENU
the TV screen.
Press the [Cursor] buttons 34
to select [Clock setting].
Press the [OK] button to display
OK
the Clock setting menu on the
TV screen.
Press the [Cursor] buttons 34 to set [Clock setting] to
[AUTO].
Press the [OK] button to conclude the setting.
OK
– Under adverse reception conditions, etc., the
Automatic time correction function may not work. In
this case, the indication for [Clock setting] is
automatically reset to [MAN.].
If the reception conditions improve later on, it may be
possible to activate this function.
EXIT
Press the [EXIT] button to exit the On Screen Display.
Hints:
– If [Clock setting] is set to [AUTO] when you open the Clock
screen, do not set it to [MAN.], otherwise, the automatic
time correcting function is deactivated.
– The built-in clock employs the 24-hour system.
– In case of a power failure, an automatic back-up system
automatically maintains the operation of the clock for
approximate 60 minutes.
– When [Clock setting] is set to [AUTO], the automatic time
correction function checks and if necessary adjusts the time
several times every day.
The automatic time correction function only works when the
VCR is switched off; it does not work in the timer recording
standby mode.
– If [Clock setting] is set to [MAN.] and [Power save] to [ON]
– If [Clock setting] is set to [AUTO] and [Power save] to [ON],
Panasonic VCR
Clock setting
Clock setting : MAN.
Time : 20:30:24
Date : 16.10.05
Panasonic VCR
Clock setting
Clock setting : AUTO
Time : 20:30:24
Date : 16.10.05
(see page 26), the time may not be maintained correctly. In
this case, manually adjust the clock.
the Automatic time correction function does not work while
the VCR is turned off. However, as soon as it is turned on,
the Automatic time correction function is activated and the
clock is set correctly.
25