Setting The Recording Method Of Time Code - Panasonic Lumix DMC-GH3A Basic Operating Instructions Manual

Recording

Setting the recording method of time code

Applicable modes:
Time code represents the recording time by the units of hour,
minute, second and frame, and can be used as a time scale for
editing motion pictures. This unit automatically records time code
during motion picture recording.
•
Time codes are not recorded on motion pictures recorded when the
[Rec Mode] is set to [MP4].
1
Select [Time Code] in the [Motion Picture] menu. (P23)
2
Press 3/4 to select the item and then press [MENU/SET].
Settings
[Time Code
Display]
[Count Up]
[Time Code Value]
58
VQT4M51 (ENG)
[ON]/[OFF]
[REC RUN]:
Counts the time code only when recording motion pictures.
[FREE RUN]:
Counts the time code even when not recording (including
when this unit is turned off).
[Reset]:
Sets to 00:00:00:00 (hour: minute: second: frame)
[Manual Input]:
Manually input hour, minute, second and frame.
[Current Time]:
Sets hour, minute and second to current time and sets frame
to 00.
Description of settings
TC 00:01:30:00 TC 00:01:30:00 TC
98 98 98