Panasonic TH-37PR10R Operating Instructions Manual page 41

Item Effect
Slot Power
V.Installation
Off On
Rotate
Off On
Serial Slot
Select
Normalization
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Remote
ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
VOL
The "SHIPPING" menu is displayed and the lock is released when it disappears.
Off Auto On
Off: Power is not transmitted to the slot power.
Auto: Power is transmitted to the slot power only when main power is on.
On: Power is transmitted to the slot power when main power is on or in the standby state.
Note: In some cases, power is transmitted to the slot power when main power is on or in the
standby state regardless of the slot power setting.
This mode is unavailable.
Off: Does not rotate the image.
On: Rotates the image 180 degrees.
Slot1 Slot2 Slot3
Selects the slot which communicates serial.
Note: The setting of an external command can be set only from the fi xed serial terminal (see page 10).
button on the remote control and hold for more than 5 seconds.
Options Adjustments
Options
Slot power
V. lnstallation
Rotate
Serial Slot Select
Adjustments
3/3
Off
Off
Off
Slot1
41