Table of Contents
Advertisement
Available languages
Available languages
Wind noise reduction function
This reduces the wind noise coming into the
microphone when recording.
≥Set to Tape Recording Mode.
1
Set [BASIC] >> [WIND CUT] >> [ON].
ª
To cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
Self-timer recording
You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
1
Set [BASIC] >> [SELF TIMER] >> [YES].
2
Press the [PHOTO SHOT] button.
≥After the recording lamp and the [
indication flashes for approx. 10 seconds,
recording will start. After recording, the
self-timer will be cancelled.
ª
To stop the timer midway through
Press the [MENU] button.
≥By operating the [OFF/ON] switch or mode dial,
the self-timer standby mode is cancelled.
≥If the continuous photoshot recording is set, the
maximum recordable pictures are recorded.
Record mode
PHOTO
SHOT
]
Recording images for wide-screen
TVs
This allows you to record images compatible with
wide-screen TVs.
Cinema Function
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
1
Set [ADVANCE] >>[CINEMA] >> [ON].
ª
To cancel the Cinema function
Set [ADVANCE] >>[CINEMA] >> [OFF].
≥Images played back vary depending on the TV
connected. Please refer to the operating
instructions for your TV.
≥This function does not widen the recording
range.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥When a cinema picture is imported into a
personal computer, the imported picture may
not be displayed correctly, depending on the
software in used.
CINEMA
25
VQT0P93
Advertisement
Chapters
Table of Contents
