Setup Menu - Panasonic TH-37PE40B Operating Instructions Manual

Setup menu

Press the MODE button to select DVB or Analogue mode.
Press the MENU button.
Move to Setup menu.
Access Setup menu.
Move to menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
Q-Link Allows you to select which AV terminal is to be used
for data communication between this TV and a
compatible recording device. Choose from AV2 and
AV3. See page 34.
AV2 / AV3 out Offers a choice of signals to send to the Scart terminal
selected in the Q-Link option. You can choose from
the current TV (Analogue, DVB) programme position,
the signal entering AV1 / AV2 / AV3 or Monitor - the
picture displayed on screen.
Note: Component signal input cannot be output to
Teletext Allows you to choose between FASTEXT or List mode.
See page 38-40.
Off timer Switches the TV off within a preset time which you can
choose from between 0 to 90 minutes in 15 minute intervals.
Side panel Allows you to choose from Off, Low, Mid and High.
Do not display a picture in 4:3, 14:9, Picture and text
modes for an extended period, as this can cause an
after-image to remain on the side
panels either side of the display field.
To prevent the appearance of such an
after-image, illuminate the side panels.
Power save By reducing the brighness of picture, power
consumption can be lowered.
Set to TV to view picture from TV tuner.
Power on
Set to AV to view input from an external equipment connected to a Scart socket, e.g. satellite receiver.
preference
Note:
The external equipment must be switched on and sending a control signal for automatic
switching at power on to occur.
Provides access to many other features including Programme edit and Auto setup. See
Tuning Menu
page 17-19.
Provides access to setup the DVB operations. See page 23.
DVB Setup Menu
Allows you to enter a security code and address information. See page 21.
Owner ID
Allows you to clear all tuning information and reset all control levels back to factory settings.
Shipping condition
See page 22.
During AV mode, Volume correction is displayed. You can adjust volume level of AV mode.
Volume correction
Volume level is memorised.
these Scart terminals.
DVB
Analogue
MODE
MENU
EXIT
Main menu
Analogue TV mode
Setup menu
Q-Link
AV2 out
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
DVB mode
Setup menu
Q-Link
AV2 out
Off timer
Side panel
Power save
Power on preference
DVB Setup Menu
Owner ID
Side panel
Shipping condition
AV mode
4 : 3 Setup menu
Q-Link
AV2 out
Teletext
Off timer
Volume correction
Side panel
Power save
Power on preference
MODE
OK
1 2 3
4 5 6
7 8 9
C 0
N
P i c t u r e menu
Sound menu
Setup menu
AV2
Monitor
FASTEXT
Off
High
Off
TV
AV2
Monitor
Off
High
Off
TV
AV2
Monitor
FASTEXT
Off
High
Off
TV
15