Miele Integrated slimline dishwasher Installation Instructions Manual page 12

Two slide skis are included and should
be installed on the feet of the dish-
washer before the machine is pushed
under the countertop. This will allow the
machine to slide easier, protect the
floor, and allow adjustment of the rear
leveling legs from the front of the unit.
^ First, adjust the height of the legs so
that the top of the dishwasher is
1
roughly / " (3 mm) below the
8
countertop.
Tipping the machine slightly to the rear,
if possible, will make adjusting the front
legs easier. Make sure the machine is
level when adjustments are complete.
12
^ Place the skis, with the ratchet at the
rear, under the dishwasher legs.