Copy Mode; Menus; Copying; Display Indicator - Panasonic SV-PT1PP Operating Instructions Manual

Copy Mode (Display Indicator)
POWER Lamp
Liquid Crystal
Display
COPY/TV
MODE
Displaying Menu (Indicator Flowchart)
Follow these steps to display menus in COPY mode.
1
Set COPY/TV MODE to "COPY".
2
Insert a Card. (p. 17)
3
Turn on this unit. (p. 18)
When using battery When using AC adaptor
Press SET
If a button is not pressed
within 10 seconds.
* When HDD SAFETY is
Press MENU
ON and is activated
(p. 18), the PC Card HDD
cannot be verified, so
always place unit on flat,
level surface.
– Note –
• Any cards that utilize adaptors other than the accessory PC Card HDD adaptor are displayed
as "PC CARD".
PT1.p19-23.p65
In Copy mode, data can be copied from one
card to another. You can also check card
storage capacity, make backups, set TV
formats, and format cards.
If unit is on battery power only, power shuts off
automatically if you perform no operation for
5 minutes to conserve battery.
MENU
/SET
STANDBY/SET
*
(When a PC Card
HDD is inserted)
(When an SD Memory
Card is inserted)
*
"Copying" (p. 21)
(When a PC Card and SD
Memory Card are inserted)
"Menus" (p. 20)
19 2003/01/14, 12:36
(When a PC Card
is inserted)
19