Panasonic Viera TX-L32S20B Operating Instructions Manual page 57

PC menu setting (changed as desired)
To make settings "How to Use Menu Functions"
Menu Item
R-Gain
G-Gain
B-Gain
R-Cutoff
Advanced
PC
G-Cutoff
Settings
B-Cutoff
Gamma
Reset to
Defaults
Input
Resolution
Clock
H-pos
PC
Setup
V-pos
Clock Phase
Sync
Reset to
Defaults
Other items p. 28 - 32
Note
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable
(p. 70).
to
Adjustments / Configurations (options)
Adjusts the white balance for red areas
Adjusts the white balance for green areas
Adjusts the white balance for blue areas
Adjusts the white balance for red areas
Adjusts the white balance for green areas
Adjusts the white balance for blue areas
Switches the gamma curve (1.8 / 2.0 / 2.2 / 2.4 / 2.6)
Press the OK button to reset to the default Advanced PC Settings
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H & V / On Green)
H & V : by the horizontal and vertical signals from your PC
On Green : by the green signal from your PC (if available)
Press the OK button to reset to the default PC Setup settings
(p. 27)
Set to the minimum level if noise occurs
57