Panasonic Viera TX-L32S20B Operating Instructions Manual page 32

How to Use Menu Functions
Menu
Intelligent Frame
Creation
24p Smooth Film
Resolution Enhancer
Power on Preference
Power on Channel
List
Auto Standby
Power Save
16:9 Overscan
DVI Input Setting
A different menu will be displayed while SD Card or PC is used. (p. 52 - p. 55 and p. 56 - p. 57)
Only available items can be selected.
If "Demo Settings" item is displayed in the Setup Menu, the TV is in "Shop" viewing environment.
To return to "Home" viewing environment initialise all settings by accessing Shipping Condition.
"Shipping Condition" (p. 48)
32
Item
Postcode
Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 20)
System
Displays the system information of the GUIDE Plus+ system
Information
Automatically compensates the picture frame rate to make the image smooth
(Off / Mid / Max)
Not valid on 24p signal
Set to "Off" if noise is generated on the screen.
Automatically compensates the picture frame rate to make the image smooth
(Off / Mid / Max)
24p signal input only
Set to "Off" if noise is generated on the screen.
Enhances the picture resolution to make the image sharper (Off / Mid / Max)
This function is available for SD (Standard definition) signal.
As for HD (High definition) signal, this function is available when aspect mode is
set to 16:9 (16:9 Overscan is set to "On") or Zoom.
Not valid on PC and Media Player
Automatically selects the input when the TV is turned on (TV / AV)
Set to "TV" to view picture from TV tuner.
Set to "AV" to view input from an external equipment connected to a SCART
terminal, e.g. satellite receiver.
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Automatically selects All Channels or Favourites list in the Information banner
(p. 15) when the TV is turned on (All Channel List / Last)
Set to "All Channel List" to display all the channels.
Set to "Last" to display the one you selected last time.
Not available on analogue mode
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times (Off / 2 / 4 hours)
Starting Timer Programming automatically does not affect this function.
Automatic input switching with the connected equipment affects this function and
time-count will be reset.
The notification message will appear 3 minutes before going to Standby mode.
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area displaying the image (Off / On)
On : Enlarges the image to hide the edge of the image.
Off : Displays the image in the original size.
Set to "On" if noise is generated on the edge of the screen.
This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
This function can be memorized separately for SD (Standard definition) and HD
(High definition) signals.
Changes the black level in the image for HDMI input mode with DVI input signal
manually (Normal / Full)
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select "Full".
The black level for HDMI input signal will be adjusted automatically.
For HDMI input mode with DVI input signal only
Adjustments / Configurations (alternatives)