Table of Contents
Advertisement
Sending from memory
Quick scan feature
You can send the document into memory before sending.
1. Insert the document.
2. Enter the fax number.
3. Press ê.
Transmitting reservation (Dual Access) feature
You can send the document even when the unit is just
receiving a fax or sending a fax from memory.
1. Insert the document during fax reception or fax memory transmission.
2. Enter the fax number using the dial keypad, one-touch dial
or navigator directory.
3. Press ê or i.
Using the scanner glass
By using the scanner glass, you can send a page from booklets or small sized paper that cannot
be sent with the auto document feeder.
Confirm that there are no documents in the auto document feeder.
1
Open the document cover.
Place the document FACE DOWN on the
2
scanner glass, matching the top edge of the
document to the " " mark on the unit.
Close the document cover.
3
If the original is a thick book, do not close
the document cover.
If necessary, press u repeatedly
4
to select the desired setting (p. 32).
5
Enter the fax number.
Example:
To send a single page, skip to step 9.
To send multiple pages, go to the next step.
Press ê to scan the document into
6
memory.
Example:
7
Place the next page on the scanner glass.
Note for the auto document feeder and the scanner glass
To stop transmission
Press {.
Sending report for confirmation
This report will provide you with a printed record
of transmission results. To use this feature,
activate feature #04 (p. 57). For the
communication message in the result column,
see page 62.
NO.=5678901
PAGES=01
01%
STANDARD
!
NEXT:PRESS SCAN
SEND:PRESS START
Sending Faxes
The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data.
If the document exceeds the memory
capacity (p. 77), sending will be
cancelled. Transmit the entire document
manually.
Note:
Transmitting reservation (Dual Access)
feature is not available when using the
scanner glass.
Press ê.
8
To send more pages, repeat steps
7 and 8.
Press i.
9
Document
cover
Scanner glass
SCAN
RESOLUTION
Journal report
The unit stores the 30 most recent fax
communication results.
— To print manually, see page 76.
— To print automatically after every 30 new fax
communications, activate feature #22 (p. 59).
For the communication message in the result
column, see page 62.
NEXT:PRESS SCAN
SEND:PRESS START
CONNECTING.....
STOP
FAX START
33
Advertisement
Table of Contents
