Table of Contents
Advertisement
Display and Connection Settings/System Settings
(
70, Accessing the Setup Menu)
All factory default settings are indicated with "Underlined" text.
Display
3, 4 select "Display"
OK
Setup
On-Screen Messages
Unit's Display
New Channel Message
Automatic
Tuning
Screen Saver
Disc
FUNCTION MENU Display
Picture
Sound
Display
SELECT
Connection
TAB
RETURN
Others
On-Screen Messages
Choose the approximate time until the digital channel information
screen (
44) disappears automatically.
The length of time the Control Panel (
changed, but "Off" does not work.
[Off]
The digital channel information is not displayed.
[3 sec.]
[5 sec.]
Unit's Display
Changes the brightness of the unit's display.
Regardless of the setting, when "Power Save in Standby" (
activated and this unit is turned off, the unit's display is turned off.
[Bright]
[Dim]
New Channel Message
Set whether to display the confirmation message when a DVB
channel is added.
[Automatic]
When a new DVB channel is added the unit will be
informed automatically.
[Off]
The Channel Messages are not shown.
Screen Saver
[On]
When this unit is not operated for approximately 5 minutes
while the screen is being displayed, the screen saver is
displayed. To return to the previous screen, press [OK].
[Off]
FUNCTION MENU Display
[On]
When the unit is turned on, the FUNCTION MENU will be
displayed. (
41)
[Off]
74
VQT2J34
Others
Setup
3, 4 select item
1
5 sec.
Bright
On
Off
43) is displayed can also be
[7 sec.]
[10 sec.]
Connection
3, 4 select "Connection"
OK
Setup
TV Aspect
TV System
HDMI Settings
Tuning
AV 1 Output
Disc
AV 2 Settings
Picture
Sound
Display
Connection
TAB
Others
TV Aspect
This setting needs to be changed when connected to a 4:3 standard
aspect TV.
[16:9]
[4:3]
Notes
Aspect 4:3/16:9
4:3
4:3 standard aspect television
≥ [16:9]:
When connected to a 16:9 widescreen
television.
≥ [4:3]:
When connected to a 4:3 aspect
television, side picture is
trimmed for 16:9 picture (
Pan & Scan).
≥ [Letterbox]: When connected to a 4:3 aspect
television, widescreen picture is
76) is
shown in the letterbox style
(
TV System
Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1. Press [3, 4] to select the TV System, then press
[OK].
[PAL]
– Select when connecting to a PAL or Multi-system television.
Programmes recorded using NTSC are played as PAL 60.
– Select to record television programmes and PAL input from
other equipment.
– [HDD] Select when playing a PAL input title recorded on the
HDD.
[NTSC]
– Select when connecting to an NTSC television.
Television programmes cannot be recorded properly.
– Select to record NTSC input from other equipment.
– [HDD] Select when playing an NTSC input title recorded on the
HDD.
The confirmation screen appears.
2. Press [2] to select "Yes", then press [OK].
Tips
To change the setting all at once (PAL/NTSC)
While stopped, press and hold [∫] and [< OPEN/CLOSE] on the
main unit simultaneously for about 5 seconds.
Notes
≥This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD.)
≥If "NTSC" has been selected, the TV Guide system cannot be
used.
≥During recording, timer recording standby or EXT LINK standby, this
unit cannot play discs that do not match the "TV System" (PAL/NTSC)
setting. Set "TV System" to match the discs before playing them.
Change back the setting after playback of disc, otherwise recording
may not record propery.
1
3, 4 select item
16:9
PAL
Video
SELECT
RETURN
[Letterbox]
16:9
16:9 widescreen television
93,
93).
Advertisement
Table of Contents
