Basic Connection; Connecting To A Television Only - Panasonic Diga DMR-EX773EB Operating Instructions Manual

Basic Connection

Use of the RF coaxial cable
≥ Keep the RF coaxial cables as far away as possible from other cables.
≥ Do not roll up the RF coaxial cables.
Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
"AV1 Output" in the Setup menu is set to "RGB 1" or "RGB 2" (
Make "AV2 Input" settings in the Setup menu (
≥ Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.

Connecting to a Television only

The RF coaxial cable
cannot be used for
showing pictures from
the unit. The unit must
be connected using
another method, e.g.
21-pin Scart cable
to show pictures
from the unit on the
television set.
1 Aerial cable to the "RF IN" on the unit.
2 RF coaxial cable (included) from the "RF OUT" on the unit to the "RF IN" on the TV.
3 21-pin Scart cable from the "AV1 (TV)" on the unit to the "AV" on the TV.
10
VQT2J34
75)
To the aerial
2
1
RF IN
RF OUT
75)
TV
RF IN
HDMI IN
AV
3
This unit
AV1
HDMI
(TV)
AV OUT
HDMI cable
You can enjoy high-quality picture by
adding the HDMI cable connection
42).
12