Standard Cmos Features - Gigabyte GA-K8NF-9-TA User Manual

2-1

Standard CMOS Features

Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
IDE Channel 4 Master
IDE Channel 5 Master
Drive A
Floppy 3 Mode Suport
Halt On
: Move Enter: Select
Date
The date format is <week>, <month>, <day>, <year>.
Week
Month
Day
Year
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-
time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave
IDE devices setup. You can use one of three methods:
• Auto
• None
• Manual
Access Mode Use this to set the access mode for the hard drive. The four options are:
Hard drive information should be labeled on the outside drive casing. Enter the appropriate option
based on this information.
Cylinder
Head
Precomp
Landing Zone Landing zone
Sector
If a hard disk has not been installed, select NONE and press <Enter>.
GA-K8NF-9-TA Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F5: Previous Values
The week, from Sun to Sat, determined by the BIOS and is display only
The month, Jan. Through Dec.
The day, from 1 to 31 (or the maximum allowed in the month)
The year, from 1999 through 2098
Allows BIOS to automatically detect IDE devices during POST(default)
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
User can manually input the correct settings.
CHS/LBA/Large/Auto(default:Auto)
Number of cylinders
Number of heads
Write precomp
Number of sectors
Thu, Dec 30 2004
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[Disabled]
[All, But Keyboard]
F10: Save
F7: Setup Defaults
- 30 -
Item Help
Menu Level
Change the day, month,
year
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
<Day>
1 to 31 (or maximum
allowed in the month)
<Year>
1999 to 2098
ESC: Exit F1: General Help