Panasonic WV-NM100 Quick Reference Manual page 24

Screenshot 3
The "Top Menu" page of the camera setup appears.
Screenshot 4
The "Basic setup" page appears.
25
STEP3
Click the [Setup] button.
! Important
The login window will appear when you press
the [Camera Control] button or the [Setup]
button on the "Top Menu" page for the first
time. The default settings for user name and
password are as follows.
User name: admin
Password: password
Change the default password for security.
STEP4
Click the "JPEG" radio button for "Operation
mode selection".
STEP5
Begin the settings for JPEG.
"JPEG mode setup"
Set the following items for JPEG.
"Refresh interval"
Select a refresh interval from the following.
Fast / Middle / Slow / Very Slow
"Image capture size"
Select an image capture size from the following.
VGA (640 x 480) / QVGA (320 x 240) / QQVGA
(160 x 120)
"Quality of image"
Select a quality of the image from the following.
Super Fine / Fine / Normal / Low
STEP6
Click the [SET] button after completing the set-
tings.
! Important
• After you click the [SET] button, the
"Command Executing" message appears.
(This message will appear even when you
click the [SET] button in other windows.)
Avoid doing any operation while the mes-
sage is displayed.
• Depending on the traffic of the network,
there might be difficulties displaying the pic-
ture. In this case, select Slow or Very Slow
for "Refresh interval" of "JPEG mode setup".