Menu Display; Communication Parameter Setting - Panasonic WV-BS500 Operating Instructions Manual

Menu Display

Setup Menu Display
1. Select the number of the camera you want to set up and a monitor to
display the SET UP MENU.
2. Display the D4 menu on the LCD by pressing the appropriate cursor
buttons.
3. Press the F1 button.
The SET UP MENU appears on the monitor.
4. To close the SET UP MENU, press the F4 button.
Note:
Do not change the SET UP MENU (for camera communication)
settings of the WV-CSR600 except CAMERA*. If those settings
are changed, the camera and the controller may get out of
control.
Submenu Display
The items marked * can be selected/changed on the submenu.
• Move the cursor to an item with the * mark and press the CAM (SET)
key. The submenu is displayed.
Note:
When you use the WV-CSR600, move the cursor to CAMERA on
the SET UP MENU and press the CAM (SET) key. The SET UP
MENU for camera setting appears in the display.

Communication Parameter Setting

Initial camera communication parameters
• Confirm the communication parameters of the matrix switcher (WJ-SX550A), and display the camera SET
UP MENU.
The initial camera communication parameters are shown in illustration above.
The other parameters are as follows:
Daisy : OFF
Camera In Number : 1
F/H Duplex : Full
Changing the camera communication parameters
1. Display the SET UP MENU. Move the cursor to COM. SET UP DISABLE and press the CAM (SET) key to
select COM. SET UP ENABLE.
2. Move the cursor to the item and select the parameter by moving the joystick to the left or right.
- 10 -
D4 menu
Camera Set Up Menu
On Exit
F2 F3 F4
F1
Camera Set Up Menu
Res A.Res Exit
F1 F2 F3 F4
Setup menu
(for camera communication)
(only for WV-CSR600)
*** SET UP MENU ***
CAMERA*
UNIT NUMBER
BAUD RATE 19200
DATA BIT 8
PARITY BIT NONE
XON/XOFF NOT USE
WAIT TIME OFF
ALARM DATA AUTO 2
DELAY TIME OFF
COM. SET UP DISABLE
Setup menu
(for camera setting)
*** SET UP MENU ***
PRESET 1*
MAP*
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE OFF
LOCAL/REMOTE LOCAL
CAMERA *