Panasonic Viera TH-42PZ700E Operating Instructions Manual page 41

You can watch two images at once. (p. 13)
•
The same input mode cannot be displayed at once.
•
The sound is active for main screen only in multi window.
•
You cannot change the aspect ratio in multi window.
•
Multi window cannot be used with PC, SD card or HDMI (available for main screen only).
•
Some signals are reformatted for suitable viewing on your display.
•
The display timeout for the input mode or programme position can be adjusted by "Banner Display Timeout" in
Setup Menu (p. 21).
Updating the software system (DVB mode)
Update system software regularly to ensure that you have latest version software.
If there is an update available, a notifi cation banner is displayed when the channel has the update information.
•
To download new software, press "OK"
If you choose not to download, press "EXIT".
■
To update automatically
Set "Auto Update Search in Standby" to "On" (p. 23)
If there is a new version software being broadcast, the TV will download this automatically.
•
The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every night under the following conditions.
Standby (TV turned Off with the remote control)
Recording is not in progress.
■
To update manually
Perform "System Update Search Now" (p. 23)
If there is an update available, a notifi cation banner is displayed.
•
To download new software, press "OK"
If you choose not to download, press "EXIT".
Note
•
During downloading, do not turn Off the TV or touch any button.
• (The TV is automatically activated after downloading is completed.)
The message might be the notifi cation beforehand. In this case, the schedule information (the date that the new
version can be used) will appear. You can set the reservation for update. The update will not start when the TV is
set to Off.
HDMI connections to some Panasonic equipment allow you to interface them automatically. (p. 36)
•
This function may not work normally depending on the equipment condition.
•
Image or sound may not be available for the fi rst few seconds when the playback starts.
•
Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
If you connect the equipment that has "HDAVI Control 2" function to the TV with HDMI cable, the sound from
DIGITAL AUDIO OUT terminal can be output as multi channel surround.
•
Easy playback is also available by using the remote control for Amplifi er or Player theatre. Read the manuals of
the equipment.
•
If you connect the same kind of equipment at once (for example: one DIGA to HDMI1 / another DIGA to HDMI2),
VIERA Link is available for the terminal with the smaller number.
•
"HDAVI Control 2" is the newest standard (current as of February, 2007) for Panasonic's HDAVI Control
compatible equipment. This standard is compatible with Panasonic's conventional HDAVI equipment.
Multi Window
Downloading (approx. 20 min.)
Downloading (approx. 20 min.)
VIERA Link " Control "
TM
41