Mode; Nicam; P-Nr; Reset To Default - Panasonic Viera TX-37LZD70 Operating Instructions Manual

How to Use Menu Functions

Menu list

Menu
VIERA Link Control
Speaker Selection
Viewing Mode
Contrast, Brightness,
Colour, Sharpness
Tint
Colour Balance
Colour Management

P-NR

3D-COMB

Reset to Default

Mode

Bass
Treble
Balance
Headphone Volume

Surround

Volume Correction

Preferred Multi Audio

NICAM

HDMI1 Input
Reset to Default
22
Item
Controls the connected Panasonic equipment
"Access and control the connected equipment by VIERA remote control" (p. 43)
"Speaker control" (p. 43)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Selects four different screen settings (Dynamic / Normal / Cinema / Auto)
Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room
Normal
Cinema : For watching movies in a darkened room producing a cinema-like picture
Auto
In each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC only), Colour
Balance, Colour Management and 3D-COMB can be adjusted and stored to suit your particular
viewing requirement (e.g., you may require different settings for viewing sports, films, news etc.)
Set for each input signal
Changes will be stored automatically
Increases or decreases the levels of these options according to your personal preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to
suit your taste
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
•
Not valid on PC signal
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
•
Not valid on PC signal
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to "On" to display sharper and more accurate colours (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components, PC, HDMI and SD Card
•
Analogue mode only
Press the OK button to reset the present Picture Mode to the default settings
•
P-NR is reset to Off (Analogue) or Min (DVB)
Select two different sound settings (Music / Speech)
In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your
particular sound requirement
Changes to any settings in a mode will affect all signal sources
Sound quality can be improved
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / On)
Provides a dynamic enhancer to simulate improved spatial effects
•
Switching is also possible by the Surround button on the remote control (p. 7)
Adjusts volume of individual channel or input mode
Selects the preferred language for DVB multi audio (depending on the broadcaster)
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
•
Off if reception is poor (FM monaural sound)
•
Analogue mode only
Select to fit the input signal (Auto / Digital / Analogue) (p. 41)
Auto
Digital
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 terminal is for digital signal only
•
No setting for HDMI2 available
Audio
Useful for visually-impaired viewers (Off / On)
Select "On" to sound the description sound if the programme has the signal
Description
Volume Adjusts the volume for audio description
Set to "On" to active the description sound track from TV speakers (Off / On)
Speakers
Headphones Set to "On" to active the description sound track from headphones (Off / On)
Press the OK button to reset the present Sound Mode to the default settings
•
Effective to Bass, Treble, Balance and Headphone Volume
Adjustments / Configurations (alternatives)
: Recommended for viewing under normal ambient room lighting conditions
: Adjusts picture settings automatically dependent on ambient lighting conditions
: Automatic detection of digital or analogue sound source
: HDMI cable connection