Before You Start Washing; Before Use, Check; Before Initial Use; Preparing The Laundry - Panasonic NA-140VZ4 Operating Instructions & Installation Instructions

The language displayed on the LCD can be
changed. For more details, see page 22.

Before use, check

For the appliance's initial operation or
after a prolonged period of non-operation,
perform the following procedures:
1. Secure the water-supply hose.
2. Open the tap.
3. Connect the power.
4. Make sure that the water-drain hose
is positioned towards a drain.
For more details, see page 41.

Before initial use

The default setting is the 40 ºC Cotton
programme. For the appliance's initial
operation, operate it WITHOUT any
detergent or clothing to rinse out residue or
moisture.
Note
There may be drops of water or
condensation in the appliance due
to the factory inspection prior to
shipment. This is not a malfunction.

Preparing the laundry

Sorting clothing
- Read clothing washing labels to help
you sort them into different loads.
- Sort the laundry by colour, by type of
fabric, and by how soiled it is. Doing
so will help you choose the correct
programme and temperature for each
wash.
- Clothes that are not colour fast should
be washed separately. Wash denim
separately.

Before You Start Washing

- You should put bras with metal wires,
tights, lace clothing and small items of
clothing into a laundry net to prevent
them or the appliance from getting
damaged.
Treating stains
Apply stain remover to stained portions.
For dirt and solid stains, wash lightly by
hand first.
Check clothing
- Check that pockets on clothing do not
contain any objects that may damage
the clothes or the appliance.
- To avoid clothes being damaged, check
and tie up loose strings, close zips, turn
clothing with raised fabrics and zips
inside out.
- Remove any hair, animal fur, sand,
and other materials with a brush before
washing.
Note
Do not wash clothes that are heavily
stained with large quantities of
vegetable oil or cosmetic oil (aroma oil,
etc.) Failure to observe this may result
in the door seal swelling, causing
the water to overflow and leading to
malfunctions.
Read Before Using - 7