Panasonic KX-TG365SK Quick Manual page 5

TG78xx_(en)_QG.fm Page 5 Monday, December 10, 2012 7:20 PM
Link to cell
Base unit: CELL 1/CELL 2 indicators
Status Meaning
On A cellular phone is connected. Ready to make/receive cellular
calls.
Flashing
Flashing rapidly A cellular call is being received.
Light off
Handset: Link to cell display items
A cellular line is in use.
t
L When flashing: The cellular call is put on hold.
L When flashing rapidly: A cellular call is being received.
A cellular phone is connected.
1
]
2 L When turned off: A cellular phone is not connected to the base unit.
*1 Corresponding cellular line(s) is(are) indicated next to the item.
A cellular call is being received on that line.
uv
Connecting/disconnecting the cellular phone
Auto connection to the cellular phone
The unit connects to the cellular phone at regular intervals if the connection is lost. To change the
interval (default: "1 min"), see the operating instructions.
L When you are using a cellular line or a Bluetooth headset, the base unit loses its connection
from other Bluetooth devices (cellular phone or headset). To automatically resume the
connection to cellular phones, leave the auto connection on.
Connecting/disconnecting the cellular phone manually (Handset)
If you will not be using the paired cellular phone's link to cell feature temporarily (for example, you
do not want the unit to ring when your cellular line receives a call), you can disconnect your
cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the
base unit.
L Even if a paired cellular phone was disconnected from the base unit, if it is brought within the
base unit's range during the auto connection interval, it may automatically connect to the base
unit.
L A disconnected cellular phone is not "Unpair" from the base unit, so pairing it to the base unit
again is unnecessary.
1
To connect/disconnect:
For CELL 1: {MENU}(6251 (A long beep sounds.)
For CELL 2: {MENU}(6252 (A long beep sounds.)
2
{OFF}
The cellular line is in use.
Phonebook entries are being copied from a cellular phone.
The base unit is searching for the paired cellular phone.
A cellular call is put on hold.
A cellular phone is not paired to the base unit.
A cellular phone is not connected to the base unit.
*1
Ready to make/receive cellular calls.
– 5 –