2
Prepare the Remote Control
Remove the insulating plastic tab from the battery
compartment before using the remote control.
3
Listen to Your iPod
1. Insert the cradle that fits your iPod model (See "Select a
Cradle for your iPod" on page 7), then plug in your iPod.
º
2. Press
the system.
. Slide CH1, CH2, CH3 to the same channel for both
speakers.
4. Use + or − on the docking system or
remote control to adjust the volume.
5. Freely move the speakers from room to room to listen to
your iPod.
n
Notes:
•
If the unit experiences interference (signal loss or distortion)
during playback, select another channel to obtain the best
reception.
on the charging dock and the speakers to turn on
MENU
/
on the