3D Sound With The Sound Virtualizer; Sound Quality; Using Headphones; Audio Software - Panasonic RX-D27 Operating Instructions Manual

3D sound with the Sound Virtualizer

Remote control only
You can create a three-dimensional sound field when listening to stereo
sound.
Press [SOUND VIRTUALIZER] to display "
Press again to cancel.
Note
• Recordings are unaffected by this feature.
• The actual effect depends on the source played.

Sound quality

You can choose one of four types of sound quality.
XBS: Adds punch to rock
CLEAR: Clarifies higher sounds
SOFT: For background music
VOCAL: Adds gloss to vocals
Press [SOUND EQ] to select a setting.
XBS CLEAR
EQ OFF (cancelled)

Using headphones

Turn down the volume and
connect the headphones
to the [PHONES] jack.
Plug type: 3.5 mm stereo
Note
Avoid listening for prolonged
periods of time to prevent
hearing damage.
".
SOFT VOCAL
(not included)

Audio software

Take note of the following points to extend the life of your equipment. Take note of the following points to extend the life of your equipment.
Always read the instructions provided with the software. Always read the instructions provided with the software.
Discs
Choose discs with this mark:
Continued use of irregular shaped CDs
can damage the unit.
Do not
• use CDs with labels and stickers that
are coming off or with adhesive exuding
from under labels and stickers.
• attach scratch-proof covers or any other
kind of accessory.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printers available on the market.
• load a blank CD-R as it will cause abnormal malfunction and may
damage the CD-R.
Cassette tapes
• Tapes exceeding 100 minutes are thin and can break or get caught in
the mechanism.
• Tape slack can get caught up in the mechanism and should be taken
up before the tape is played.
• Endless tapes can get caught up in the deck's moving parts if used
incorrectly.
• Sound quality may be effected and the cassette tape may become
stuck if you do not adhere to the following.
- Do not use other stickers not included with the cassette tape.
- Place stickers on the cassette tape only as indicated.

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and
water solution or a weak detergent solution.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
Tape head care
Clean the heads regularly to assure good quality playback and recording.
Use a cleaning tape (not included).
Lens care
Clean the lens regularly to prevent malfunctions.
Use a blower to remove dust and a cotton swab
if it is extremely dirty.
Recommended product:
Lens cleaner kit (SZZP1038C).
Lens
11
RQTT0627