Panasonic TC-14JR1P Operating Instructions Manual page 16

INSTALLATION AND SET---UP
VCR
*1 We recommend that you switch ON the VCR's test signal --- refer to your VCR instruction book.
16
TV only
Connect Aerial co---axial cable direct
to TV RF IN socket.
OR
USING A VCR
Connect aerial co---axial cable to RF Input socket of
VCR and a RF co---axial cable from VCR RF Out
socket to TV RF IN socket.
The VCR can also be connected to the TV using a
SCART to SCART lead.
Further details of Audio/ Video connections
can be found on page 21.
Ancillary equipment and leads are not supplied.
1
Switch ON your VCR. *
Plug the TV into a mains socket and switch ON.
Programmes will appear immediately if your
dealer has programmed the TV for you.
1
2