Table of Contents
Advertisement
1. Introduction and Installation
3
Insert the tab (1) into the slot (2) on the unit
and insert the rib (3) of the handset cradle
into the bottom groove (4) of the speaker.
3
4
L Make sure that the triangles (1) match to
install the handset unit correctly.
1
To remove the handset unit
1. Pull the handset unit slightly forward (1),
and then remove the rib of the handset cradle
by lifting the handset unit in the direction of
the arrow (2).
2
1
20
2
1
2. Remove the tab (1) from the slot (2) on the
unit and disconnect the handset connector
(3).
2
3
1
Advertisement
Table of Contents
