Panasonic DX-1100 Manual page 188

Troubleshooting
08001000002
Mode
08001080001
#@multitude
Print Copy Quality
08001080007
Print Copy Quality Print Copy Q ality
08001080008
Communication
08001080097
No Unit Operation
08001080010
186
Symptom
Printout a Journal report (e.g. [FUNCTION], [6], [1] and [SET])
Vertical lines printing
and check quality to make sure whether your machine has a
on the received
trouble.
document
If Journal report quality is OK, your machine has no problem,
report to the sending party that they have a problem.
If copy is NG, replace the Toner Cartridge.
Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Try reversing the recording paper to the other side.
1. Make sure you are using the correct paper for the best
Missing dots or
possible print quality.
lines/inconsistent
darkness within print
2. Replace the Toner Cartridge.
The Toner Cartridge may be running out of toner. Replace the
Fading print
Toner Cartridge.
You may need to choose a different paper for the best possible
Faint print
print quality.
1. Check the connection of the telephone line.
No dial tone
2. Check the telephone line.
1. Check the connection of the telephone line.
No auto answer
2. Check the Reception mode setting.
3. Check if machine is printing a report. (e.g.: Transaction
Journal, Fax Parameter List).
If machine is printing a report, machine cannot receive until
printing is completed.
4. If the printed document is the final Transaction to print the
Transaction Journal automatically, machine will usually print
the Transaction Journal automatically after printing out the
document. In this case, the machine cannot receive until the
Transaction Journal has been printed.
An information code will be shown on the display. Refer to the
Cannot transmit or
information code table to find out the trouble.
receive
To reset the machine, turn-off the Power Switch for a few second
No unit operation
then turn-on again.
Action page
171
18
200
200
18
18
200
196
196
78
187
23