Table of Contents
Advertisement
– Labels that do not completely cover the
backing sheet as follows.
6.4.4 Envelopes
Use envelopes designed for laser printing. We
recommend the following:
– High quality envelopes of 90 g/m
– Envelopes that have thin, sharply creased
leading edges, and
– Envelopes that have diagonal seams.
L You can load 1 envelope of 90 g/m
at a time for printing, print-side down.
L Insert envelopes, print-side down (1),
then adjust the recording paper guides
(2).
2
paper,
2
paper
1
2
6. Multi-Function Station software
L Remove each envelope after printing.
Note:
L Wrinkles may occur in some cases, even if
high quality envelopes are used.
L Avoid printing in high humidity, above 70%
relative humidity (RH). High humidity may
cause the envelope to curl, pick up excess
toner or seal the envelope.
L Avoid printing below 10 °C with less than
30% RH, or it may cause light printing.
L Store envelopes away from moisture and
humidity, where they can lay flat and their
edges will not be bent or damaged. The
humidity should not exceed 70% RH.
Do not use envelopes with any of the
following characteristics (using these may
result in paper jams):
L Irregularly shaped envelopes
L Envelopes with curls, wrinkles, nicks, twists,
dog-ears or other damage
L Envelopes with side seam construction
L Highly textured envelopes, or envelopes with
extremely shiny surfaces
L Envelopes that seal by removing a peel-off
strip
L Envelopes with more than one flap to be
sealed
L Self-adhesive envelopes
L Envelopes that are baggy or not sharply
creased
L Embossed envelopes
L Envelopes that have previously been printed
on
L Envelopes that include cotton and/or fibre
material
Side seam
Peel-off strip
construction
Twisted
Curled
Waved
Dog-eared
Multiple flaps
Bent-edged
Self adhesive
47
Advertisement
Table of Contents
