Auto Power Standby Function - Panasonic Viera TX-L42U2L Operating Instructions Manual

TV
SD Card slot
(p. 46)
CI Slot
(p. 42)
Headphones
jack (p. 58)
Remote control signal receiver
•
Do not place any objects between the TV remote control signal receiver and remote control.

Auto power standby function

The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• "Off Timer" is active in the Setup Menu (p. 17)
• no operation is performed for the period selected in "Auto Standby" (p. 30)
This function does not affect Ext Rec. of Timer Programming and Direct TV Recording.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item
Access the menu / store settings after adjustments
have been made or options have been set
ON SCREEN HELP Instructions box - Operation guide
(example: Sound Menu)
Sound Menu
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
Speaker Distance to Wall Over 30cm
Stereo
MPX
Select
EXIT
Change
RETURN
Power and Timer LED
Standby: red
On: green
Timer Programming On: orange
Timer Programming or Direct TV Recording is in progress: orange (flash)
Standby with Timer Programming On or Direct TV Recording: red with
orange flash
When using the remote control, indicates the TV has received a command.
C.A.T.S. (Contrast Automatic Tracking System) sensor
•
Senses brightness to adjust picture quality in "Eco Mode" in Picture Menu is set to
"On" (p. 26)
1/2
0
0
0
11
0
Page up
Operation guide will help you.
Page down
Function select
Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC signal) / Bass ("Music" or "Speech" mode in
Sound Menu) / Treble ("Music" or "Speech" mode in Sound
Menu) / Balance / Auto Setup (p. 32 and p. 33)
Increases or decreases the channel position by one.
When a function is already displayed, press to increase
or decrease the selected function. When in Standby
mode, switches TV On (press for about 1 second).
Changes the input mode
Mains power On / Off switch
•
Switch On to turn on the TV or turn
the TV to Standby mode by the remote control
EXIT
Exit the menu system and return to the
normal viewing screen
Move the cursor / adjust levels / select
from a range of options
RETURN
Return to the previous menu
9