Picture Menu - Panasonic TX-32PS11D Operating Instructions Manual

PICTURE MENU

This menu allows you to make adjustments to the picture quality
Open the Main menu
Move to Picture menu
Access Picture menu
Move to your choice
Increase or decrease levels or set
options
Press the TV/AV button to exit the
menu system
Press the N button to return
the factory setting
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint ( )
NTSC only
Colour balance
P- -NR
MENU
TV/AV
The Viewing mode in the Picture
menu allows you to select,
adjust and store three different
screen settings --- Dynamic,
Normal and Cinema.
In each Viewing mode setting,
Contrast, Brightness, Tint ( in
NTSC only), Colour,
Sharpness can be adjusted and
stored to suit your particular
viewing requirement
example you may require
different settings for viewing sport, films, news etc.).
Viewing mode offers you up to a maximum of three separate settings for each
signal source: RF, AV1, AV2, AV3 (including RGB).
By analysing and processing the incoming picture, all three modes feature
automatic enhancement.
You can restore the factory settings for the selected profile on the selected signal
source by pressing the "N" button on the remote control.
The Contrast, Brightness, Colour, Tint (in NTSC only) and Sharpness levels can
be adjusted to suit your own preferences and the viewing conditions.
The Colour balance setting allows you to set the overall colour tone of the picture.
P--NR will automatically reduce unwanted picture interference.
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Colour Balance Normal
P-NR
Picture Menu
Viewing Mode
Contrast
N
Brightness
Colour
Sharpness
Colour Balance Normal
P-NR
Picture Menu
Viewing Mode
Contrast
Brightness
and
Colour
Sharpness
Colour Balance Normal
(for
P-NR
∧
+
OK
−
∨
Return
Dynamic
Off
Normal
Off
Cinema
Off
Select
Change
Exit
15