Inserting and Removing the Card (optional)/
Check that this unit is turned off.
Confirm that there is no foreign object.
We recommend using a Panasonic card.
1: Slide the [LOCK] switch A, and release
2: Slide the release lever B and open the
Always use genuine Panasonic batteries.
If you use other batteries, we cannot guarantee the quality of this product.
Battery: Being careful about the battery
orientation, insert all the way until you hear
a locking sound and then check that it is
locked by lever C. Pull the lever C in the
direction of the arrow to remove the
Card: Push it securely all the way until you
hear a "click" while being careful about the
direction in which you insert it. To remove the card, push the card until it
clicks, then pull the card out upright.
D: Do not touch the connection terminals of the card.
Close the side door until it clicks, and then lock
the [LOCK] switch by sliding it toward .
Confirm that the red part on the [LOCK] switch is not
- 20 -