Panasonic Lumix DMC-FT25 Operating Instructions Manual page 146

The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated.
Multiple pictures are taken at one time.
> Set Auto Bracket
The subject is not focused properly.
•
The focus range varies depending on the Recording Mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
The recorded picture is blurred. The Optical Image Stabiliser is not effective.
> The shutter speed becomes slower when pictures are taken in dark places so hold the camera
firmly with both hands to take the pictures.
> When taking pictures at a slow shutter speed, use the Self-timer.
Taking pictures using Auto Bracket is not possible.
•
Is there any memory remaining on the built-in memory or the card?
The recorded picture looks rough. Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [
etc. noise will appear.)
> Decrease the ISO sensitivity.
> Take pictures in bright places.
•
Have you set [High Sens.] in Scene Mode, or [Burst] in [Rec] menu to [
resolution of the recorded picture decreases slightly because of high sensitivity processing, but this
is not a malfunction.
(P61) or [Burst] (P90)
] when the camera is shipped. Therefore, when taking pictures indoors
(P79)
Others
(P60)
of the [Rec] menu to [OFF].
(P33)
(P27)
(P27)
- 146 -
(P59)
] or [ ]? If so, the