Wiring Diagram (Recommended System) - Panasonic CY-VHD9401N Installation Instructions Manual

Electrical Connections
E
N
G
L
I

Wiring Diagram (Recommended System)

S
H
17
CY-VHD9401N
VTR(2)-IN
Video
REMOTE-OUT
R (red)
(yellow)
(Black)
L (white)
VIDEO-CONT
(Green/yellow stripe)
VTR1-IN
RCA cord
Video game (option)
(option)
Example of system combination:
≥ CD player/receiver (CQ-C9901N, option)
≥ DVD changer (CX-DH801N, option)
≥ Video game (option)
≥ VCR, etc. (option)
50
CY-VHD9401N
(continued)
L (white)
VTR output cord
R (red) RCA cord (option)
RCA cord (option)
Video (yellow)
L (white)
R (red)
Note:
≥ For wiring, carefully read the operating
instructions for the devices connected.
L (white)
AUX1-IN
R (red)
CQ-C9901N (option)
REMOTE-IN
VIDEO-CONT
Video (yellow)
L (white)
R (red)
+
Front speaker cord
-
FRONT SP
+
-
Rear
+
speaker
cord -
REAR SP
+
-
By performing this connection, remote control
signals can be received by this unit (CY-VHD9401N).
(Do not connect the remote control signal receiver
supplied with CX-DH801N when this connection
has been performed.)
CX-DH801N (option)
Connections:
or
≥ Connect this unit's (CY-VHD9401N) remote-out
cord to the REMOTE-IN connector on the DVD
changer (CX-DH801N, option) using an RCA
cord (option).
≥ Connect this unit's (CY-VHD9401N) video
control lead to the DVD changer's (CX-DH801N,
option) video control lead.
Camcoder
(option)
Remote control unit:
or
≥The remote control unit supplied with the
CX-DH801N must be used to operate the
DVD changer (CX-DH801N, option). To
VCR (option) use it to perform operations, point it at the
remote control signal sensor of this unit
(CY-VHD9401N).
[The DVD changer (CX-DH801N, option) cannot
be operated using this unit's (CY-VHD9401N)
remote control unit.]
E
N
G
L
I
S
H
18
Front speaker
(option)
Rear speaker
(option)
51
CY-VHD9401N