Panasonic Viera TX-P42U20E Operating Instructions Manual page 19

■
Other useful functions
View details of the programme (DVB mode)
Select the programme
select
Timer Programming (DVB mode)
Timer Programming is a timer to remind watching or record the programme to the external recorder.
Select the Select the function
(Reminder or Ext Rec.)
forthcoming
programme
Timer Programming
F u n c t i o n
select
set
Ext Rec. : to record the programme to the recorder
Reminder : to remind watching the programme
■
To check / change / cancel a Timer Programming event
■
To return to TV Guide
■
If you select the current programme
A confirmation screen whether you wish to watch or record it will appear.
Select "Timer Programming" and set "Ext Rec." to record from the time you finish the timer programming
event setting.
Das Erste
19:30- 20:00
View Timer Programming
Note
●
This function is not available in Analogue mode.
●
Timer Programming only works reliably if correct time information is received via the signal from the
broadcaster or service provider.
●
No other channel can be selected while Ext Rec. of Timer Programming is in progress.
●
When recording programmes, be sure to make the proper settings on the recorder connected to the TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 52 and
p. 53) and the "Link Settings" (p. 28) are completed, no setting of the recorder is required. Also read the
manual of the recorder.
View advertisement
Depending on the country you select, this TV supports the GUIDE Plus+ system in DVB-T or
Analogue mode
The postcode entry or update is required. Follow the on screen instructions.
●
Also possible to setup manually from the Setup Menu
"Update" / "Postcode" in "GUIDE Plus+ Settings" (p. 31)
●
Enter your postcode when using this function for the first time. If you enter an incorrect postcode for your
area, or no postcode is entered, advertisements may not be displayed correctly.
Display advertisement information
OPTION
■
To change advertisements
■
To return to TV Guide
Note
●
To update the information continuously, the TV must be left in Standby mode at night.
View details
Wed 28.10.2009 10:46
N o . Ch a n n e l Na m e Date Start
Ext Rec. D 1 BBC ONE Wed 28.10.2009 2 0:00
<T I M E R > (30 mi n. )
-- - - - - --/-- --:--
( --- min.)
-- - - - - --/-- --/-- --:-- --:--
(--- min.)
-- - - - - --/-- --:--
(--- min.)
-- - - - - --/-- --:--
(--- min.)
(Timer Programming screen)
When the start time comes, the channel will be switched automatically and
the video and audio signals will be output. 2 mins. before the starting time,
a reminder message appears if you are watching TV.
When you are watching TV, a reminder message appears 2 mins. before
the start time. Press the OK button to switch to the programmed channel.
RETURN
select
access
●
To display the latest advertisement
"Update" in "GUIDE Plus+ Settings" (p. 31)
OPTION RETURN
or
TV Guide: Landscape
Wed 28.10.2009
10:46
Wed 28.10.2009
DIY SOS
BBC ONE
20:00 - 20:30, 30 min.
Return to list
EXIT
Timer Programming
RETURN
store
End
20:30
●
--:-- select
LED will turn to orange if
--:-- --:--
Timer Programming is set.
--:--
--:--
(Orange LED will flash if Timer
Programming is in progress.)
"Timer Programming" (p. 39)
●
Press again to return
to TV Guide.
Details
LED
19