Care And Cleaning - Panasonic CS-XE7JKEW Operating Instructions Manual

Air conditioner indoor unit cs-xe7jkew; cs-xe9jkew; cs-xe12jkew; cs-xe15jkew single split outdoor unit cu-e7jke; cu-e7jke-3; cu-e9jke; cu-e9jke-3; cu-e12jke; cu-e12jke-3; cu-e15jke; cu-e15jke-1 multi split outdoor unit cu-2e15gbe; cu-2e18cbpg; cu-3e18ebe;
Hide thumbs Also See for CS-XE7JKEW:
Table of Contents

Advertisement

CARE & CLEANING
CARE & CLEANING
• Switch off the power supply before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
CAUTION
WASHING INSTRUCTIONS
WASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
ALUMINIUM FIN
ALUMINIUM FIN
e-ion FILTERS
e-ion FILTERS
• Clean the fi lters regularly.
• Wash/rinse the fi lters gently with water
to avoid damage to the fi lter surface.
• Dry the fi lters thoroughly under
the shade, away from fi re or direct
sunlight.
• Replace any damage fi lter.
FOR SEASONAL INSPECTION AFTER EXTENDED
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select Cooling/Heating operation,
after 15 minutes of operation, it is normal to have the following
temperature difference between air inlet and air outlet vents:
Cooling: ≥ 8°C
FOR EXTENDED NON-USE
FOR EXTENDED NON-USE
• Activate Heat mode for 2~3 hours to remove moisture left in
the internal parts thoroughly.
• Turn off the power supply.
• Remove the remote control batteries.
8
Remove
Remove
Heating: ≥ 14°C
HINT
HINT
• To ensure optimal performance of the unit, cleaning
maintenance have to be carried out at regular intervals.
Dirty unit may caused malfunction and you may retrieve
error code "H99". Please consult authorized dealer.
FRONT PANEL
FRONT PANEL
Remove Front Panel
• Raise and pull to remove the front
panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front
panel to close it securely.
e-ion CHARGING WIRE
e-ion
INDOOR UNIT
INDOOR UNIT
Wipe the unit gently with a soft,
dry cloth.
ACTIVE e-ion GENERATOR
ACTIVE e-ion GENERATOR
NON SERVICEABLE CRITERIAS
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then please consult
authorized dealer under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
CHARGING WIRE
Clean with dry cotton bud.
• Active e-ion
generator cleaning is
recommended every 6
months.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents