GROUP - CONT'D
ADDING TO A GROUP
Add images to a group that already exists.
Follow steps 1 through 5 for "Creating a Group".
• The Add to Group menu will appear.
88
Press the Up or Down button to
highlight a group.
Press the Select soft key to
select the highlighted group.
• A
will appear next to the selection, then
the camera will return to the Edit menu.
DISSOLVING A GROUP
Remove all the images from the group and delete the group name from the Group
list. The images will remain on the compact flash card in the camera.
Turn the camera on and slide the
Mode switch to REV.
• Press the mode lock button while switching
Select an image in the group
(p. 75), then press the menu
button.
Press the Left or Right button
until Edit is selected.
Press the Up or Down button
until Group is highlighted.
Press the Dissolve soft key.
• The Dissolve soft key is only available when
• The Dissolve soft key will disappear when
to REV from PLAY or REC.
a group is marked or selected.
the operation is complete. Press the Exit
soft key to return to the Review screen.
89