Network Settings; Network Connection - Panasonic TX-P42ST60E User Manual

Network settings

Network Connection

Ensure the connections are completed before starting network setup.
Home network
■
Quick setup - Wireless
1. Display the menu with
2. Select Network
Confirm the encryption key, settings and position of your access point
●
before starting setup. For details, read the manual of the access point.
3. Select Quick setup
When the LAN cable is connected, wired setup will be done
●
automatically.
4. Select your desired access point with
Available Wireless Networks are displayed automatically.
●
: Encrypted access point
For WPS(Push button)
●
1) Select Easy setup with Push button
access
2) Press the WPS button on the access point until the light flashes
3) Connect the TV with the access point with
– WPS: Wi-Fi Protected Setup™
– If the connection has failed, check the settings and positions of your
access point. And then, follow the on-screen instructions.
It is recommended to select the encrypted access point.
●
5. Enter the encryption key of the access point with
OK to set
You can set characters using numeric buttons.
●
Press BACK/RETURN
●
6. Automatically setup is done and the
Home network
7. Select Exit with
Network connections
MENU
Network Connection
with / and press
to store
Network Status
Network settings
/ and press OK to set
- 75 -
with / and press
OK to access
/ and press OK
with / and press
OK
/ /
screen is displayed
Network Status
OK to access
to access
OK to
/ and press